Ceramic Corrugated Structured Packing

Ceramic Corrugated Structured Packing

Structured packing gives the highest efficiency per unit volume of any packing type, but metal cannot survive hot acid and plastic cannot survive the temperature. Ceramic corrugated packing fills that gap: the same ordered, cross-corrugated geometry in a body that resists sulphuric acid and operates at temperatures where polymers are out of the question.

Specifications

ParameterValue
GeometryCross-corrugated ceramic sheets, ordered block structure
EfficiencyHighest of the packing types per unit volume, with low pressure drop per theoretical stage
Material characterAcid resistant ceramic; thermally stable at high temperature
Key selection inputsMedium and concentration, temperature, gas and liquid loads, efficiency target
HandlingSupplied in blocks; requires care in loading to keep sheets aligned and undistorted
GradesSeveral surface-area grades available — advise duty for selection

Available Materials

Acid resistant ceramic · Silicate ceramic

Typical Applications

  • Sulphuric acid drying and absorption towers
  • Flue gas desulphurisation and tail gas treatment
  • Coke oven gas desulphurisation
  • High temperature absorption and stripping
  • Nitric and hydrochloric acid absorption

How It Compares

Against ceramic random packing it is far more efficient per unit volume and lower in pressure drop, at higher cost and with much stricter loading requirements. Against metal structured packing it is heavier and more fragile, but it is the only option in hot acid where metal corrodes.

Frequently Asked Questions

Why not use metal structured packing in acid service?

Because it corrodes. In sulphuric acid drying and absorption, and in FGD with chlorides present, the metal either fails or contaminates the product — ceramic is the standard answer.

How is it installed?

In ordered blocks, layer by layer, with each block seated square and the sheets undistorted. A distorted block channels and loses most of the benefit of structured packing.

Can it replace random packing in an existing tower?

Often yes, with a shorter bed for the same duty — but the support, distributor and pressure-drop budget all have to be checked. Send the column data and we will compare both options.

Related Products

Wire Mesh Structured Packing

Wire mesh structured packing for high-efficiency distillation and absorption. Low HETP, low pressure drop. Fac…

Corrugated Sheet Metal Packing

Corrugated sheet metal structured packing equivalent to Mellapak. High capacity, low pressure drop for absorpt…

Plastic Structured Packing

Plastic structured packing in PP and PVDF for corrosive scrubber and absorption service. Lightweight, chemical…

Get a quote for Ceramic Structured Packing

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp