Metal Pall Ring (SS304 / SS316L)

Metal Pall Ring (SS304 / SS316L)

The metal pall ring is the most widely used random packing for high-throughput distillation and absorption columns. Its internal ribs and open-wall design increase surface utilisation while keeping pressure drop low, delivering capacity roughly 40% higher than a classic Raschig ring of the same nominal size.

Specifications

ParameterValue
Nominal size16 mm / 25 mm / 38 mm / 50 mm / 76 mm
MaterialSS304, SS316, SS316L, carbon steel, copper
Specific surface area90–420 m²/m³ (size dependent)
Void fraction92–96%
Bulk densitySS304: 170–620 kg/m³ (size dependent)
Packing factor48–165 m⁻¹
Wall thickness0.3–0.8 mm

Available Materials

SS304 · SS316 · SS316L · Carbon steel · Copper

Typical Applications

  • Distillation columns
  • CO₂ and H₂S absorption
  • Solvent recovery
  • Vacuum distillation

How It Compares

Compared with a Raschig ring, the metal pall ring offers higher capacity and better liquid distribution at a small increase in cost. Compared with IMTP-type saddles, it is slightly lower in efficiency at high liquid loads but more economical for general service.

Frequently Asked Questions

What is the difference between SS304 and SS316L pall rings?

SS316L contains molybdenum, giving far better resistance to chlorides and acid gas. For seawater or sour service, choose SS316L; for general clean hydrocarbons, SS304 is usually sufficient.

What is the bulk density of a 25 mm metal pall ring?

A 25 mm SS304 pall ring typically packs at around 400–520 kg/m³ depending on wall thickness. We confirm the exact figure against your operating conditions before quoting.

Can metal pall rings be used in vacuum service?

Yes. The open-wall geometry gives very low pressure drop, which is why metal pall rings are a standard choice for vacuum distillation columns.

Do you offer custom wall thickness?

Yes, wall thickness and nominal size can be matched to your process requirements and structural load.

What is the typical lead time?

Lead time depends on quantity and material. We confirm the delivery schedule in writing before you place an order.

Related Products

Raschig Ring

Raschig ring in metal, plastic and ceramic. The classic random packing for simple, robust columns. Factory-dir…

Cascade Mini Ring (CMR)

Cascade Mini Ring (CMR) random packing for high-efficiency distillation and absorption. Lower height per theor…

IMTP Equivalent Packing

IMTP-equivalent saddle packing for high-capacity distillation and absorption. Open, non-nesting geometry. Fact…

Get a quote for Metal Pall Ring

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp